Trademarks registered by Intevep include:


AQUACONVERSION®:
Catalytic process to produce high quality diesel and intermediate distillates, from heavy and residual crudes.

BIODOIL®:
Hydrated mineral oil to formulate drilling, completion, and rehabilitation fluids. Non-toxic and biodegradable.

BIORIZE®:
Improves the biodegradation process of organic compounds, crude and contaminated soils due to oil spills.

CARBOLIG®:
Natural lignite for use in drilling oil and gas wells for rheological and filtration controls in water-based drilling fluids.

DHDV™:
Deep hydrodesulfurization process to obtain very low sulfur diesel and gasoil.

DISOL®:
Converts gas into high value-added and environmentally friendly products.

DRILLACCSOIL®:
Technology for management of water-based cuttings by means of its spread over soils.

ENDRILL®:
Technology to transform drilling cuttings into valuable materials through stabilization and solidification processes.

PERMAVISC™:
Drilling and rehabilitation fluid system to access high permeability or low pressure reservoirs.

HDHPLUS®:
High conversion process for heavy and extra heavy crude from the Orinoco Oil Belt via hydro conversion.

INTEBIOS®:
Technological package for the bio-treatment of organic waste and the recovery of soils contaminated by oil spills.



INTECARB®:
Calcium and magnesium carbonate, of controlled granulometry, for fluids to be used in drilling, completion, and rehabilitation of wells. It controls the invasion into the formation.

INTEFLOW®:
Fluid for drilling, completion and rehabilitation of wells in low pressure reservoirs, based on oil-in-water (O / W) emulsion.

INTOIL®:
Oil based drilling fluid system. Available in two versions:100% oil and reverse emulsion.

ISAL®:
Hydroconversion technology to produce low sulfur gasoline, without loss of octane.

MISINT®:
On-site solvent-based upgrading technology to improve the quality of heavy crude oil.

MULTIGEL®:
Gelling system to control high water cuts in production processes.

Net-DAS™:
Architecture applied to the supervision and control of industrial field processes that integrates PLC, Remote Terminal Unit and human / machine interface.

ORIMATITA®:
Product developed with natural hematite to densify drilling fluids and high weight cementation grouts.

ST-5®:
Catalytic additive, based on zeolite, to maximize the yield of light olefins and gasoline, and to increase the number of octanes.

ULTRAMIX®:
Chemical formulation to remove formation damage caused by inverted sludge, 100% oil, blockage by water and emulsions of the "W / O" type.

WELLTECH™:
Methodology for determining the amount of water, crude and gas in a multiphase stream, using a gas-liquid separator operating in batch mode.